Welding Flange Y Oil / Liquid Strainer Filter With Stainless Steel Screen
1,High strength, fine sealing
2,Carbon steel ,SS304 or 314
3,connection type:flange ,welding ,thread etc
1, Carbon steel ,SS304 or 314 available
2,CE and ISO9001 approved
3,all types of flange connection available
Water, steam, and oil as suitable medium
Size: DN15-DN600 (1/2 to 24 inches)
Nominal pressure: PN1.0/1.6MPa
Body and bonnet: cast-iron and ductile-iron
Screen: stainless steel
Bolt and nut: carbon steel with zinc-plated
Y welding flange strainer
Y-Strainers are typically used in applications where the amount of solids to be removed is small, and where frequent clean-out is not required. They are most often installed in gaseous services such as steam, air, nitrogen, natural gas, etc. The compact, cylindrical shape of the Y-strainer is very strong and can readily accommodate the high pressures that are common in this type of service. Pressures up to 6000 psi are not unusual. When steam is being handled, high temperature can be an additional complicating factor. A steam pressure of 1500 psi will often be found at temperatures of 1000°F.
A Y-strainer has the advantage of being able to be installed in either a horizontal or vertical position. However, in both cases, the screening element or "leg" must be on the "downside" of the strainer body so the entrapped solids can be properly collected and held for disposal. Eaton heavy-duty Model 85 Y Strainers are furnished with high quality stainless steel screens that are carefully fabricated to fit the strainer body perfectly. This, coupled with the precision machined screen seat on the body of the strainer, protects against any bypass.
Y strainers are a cost-effective solution for the mechanical removal of unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.