Sea / River / Lake / Rain / Industrial Water Filtration
Side in single bag filter housing Water Treatment Bag Filter Housing
■ Applicable industries: Fine chemicals, water treatment systems, plup and paper, automobile manufacturing, petro-chemical, machining, coatings, electronics etc.
■ Applicable liquids: Wide applicability, all liquids contained micro-impurities
■ Filtration function: Remove all sizes of particles, purify liquids, protection of critical equipment
■ Filtration type: One-time intercept filtering, the filter bag need to be replaced manually regularly
1, Carbon steel ,SS304 or 314 available
2, CE and ISO9001 approved
3, all types of flange connection available
Water, steam, and oil as suitable medium
Size: DN15-DN600 (1/2 to 24 inches)
Nominal pressure: PN1.0/1.6MPa
Body and bonnet: cast-iron and ductile-iron
Screen: stainless steel
Bolt and nut: carbon steel with zinc-plated
1,BOCIN bag filter housing
Bag filter is often characteristic of high flow rate and long service life. It consists of stainless steel housing, bag holder and filters.
The bag filter housing is made of SS304 or 316L. With different sizes, it is capable of holding 1 to 8 bags. The opening can be flange type or screw type.
Bags filter housing with capacities of up to 24 bags.
The cover flange adopt handwheel and swing bolts ,open and close easily ,fast bag changeouts.
Positive o-ring sealing offers easy and safe operation.
Liquid bag Filter effectively removes dirt,pipe scale,and other contaminants from process liquids such as water, beverage,chemical and petroleum products. Bag filter can be used with the standard #1,#2,#3,#4 size bags or the standard perforated basket as a strainer. Mesh lined baskets are also available as an optional feature effective filtering area is rather big,achieving more efficient filtering result.Eye Bolt Closure System.The user friendly,cost effective bag filter housing for high volume,multiple applications and processes. The Max. flow of single unit are from 90 Cubic m/h to 1080 cubic m/h.
Model selection >>
SGD-I series Clamp single bag filter
SGD-II series Side-in single bag filter
SGD-IN Top-in single bag filter
2,BOCIN bag filter housing Specification
SGD-I series Clamp single bag filter >>
Clamp single bag filter is suitable for low pessure condition, which is an economic choice.
SGD- II series Side-in single bag filter >>
Side-in single bag filter is the standard type filter of BOCIN, with easy open type, which is commenly used in filtration field.
FLOW RANGE m3/hr
FILTRATION AREA m2
SGD-IN Top-in single bag filter >>
Top-in single bag filter has a very perfect sealing effect, the filter vessel is fully used by filtered liquid.
FLOW RANGE m3/hr
FILTRATION AREA m2
Bag hose is a new type of equipment. It is mainly composed of a filter bag, shell,support rack and fixture and measuring devices. The fluid flows from the filter entrance into the filter cartridges, with the miscellaneous quality piece retained on the surface or deep in, while clean fluid runs off from the outlet.
Filters adopt clamps, ordinary flange, fast shackle bolt to lock ears .They are very convenient for operation. With female or sanitary clamp connected in the top cap, it is used to install the gauge or platoon air valve, the inlet and outlet is connected with a flange, silk thread and sanitary clamp.
Bag hose has the following features of small cabbage, obvious filtering effectiveness, simple operation and low cost.